KARAKTERISASI KOMPOSIT RESIN EPOKSI SERBUK KAYU

  • Darwin Sugan Darsa Program Studi Fisika Fakultas Sains dan Teknologi, UIN Syarif Hidayatullah Jakarta Jalan Ir. H. Juanda no 85 Jakarta Indonesia 14512
  • Muhammad Rizki Program Studi Fisika Fakultas Sains dan Teknologi, UIN Syarif Hidayatullah Jakarta Jalan Ir. H. Juanda no 85 Jakarta Indonesia 14512

Abstract

Has been done sinthesize composite from saw dust with epoxy resin where as ratio of saw dust mass is 1 gram : 2 grams : 3 grams and same amount of epoxy resin 7.086 grams. Mass addition of saw dust yield darker composite appearance on the biggest one, and based on mass and volume measurement of composite yield lower density of composite by the density of each samples are 1.26 g/cm3, 1.15 g/cm3, dan 1.12 g/cm3. Then based on XRD characterisation result identification of two fase epoxy resin and saw dust yields the increasing of samples’ crystallinity as the increasing of saw dust sequently 20.58%,24.99 %, dan 25.57%.

Keywords: Composite, Epoxy Resin, Saw Dust, Mass Addition.

Published
2015-10-30