Influencing Factors Affecting Performance in Sustainable Manufacturing among Malaysian Companies: A Conceptual Study

Authors

  • Ang Hong Loong Universiti Malaysia Sabah
  • Suddin Bin Lada Universiti Malaysia Sabah 
  • Wang Kehui Universiti Malaysia Sabah 
  • Li Xinyue Universiti Malaysia Sabah 

DOI:

https://doi.org/10.21009/ISC-BEAM.011.72

Keywords:

organizational performance, dynamic capabilities, sustainable manufacturing factors, manufacturing companies, Malaysia

Abstract

This research investigates the influence of sustainable manufacturing factors on the performance of manufacturing companies in Malaysia, with a specific focus on sustainable innovation, quality, cost efficiency, delivery, and operational flexibility. Grounded in the Dynamic Capabilities theory, it provides valuable insights that are pertinent to academia, policymakers, and the Malaysian manufacturing sector. The primary goal is to provide a conceptual framework for sustainable manufacturing that could improve organizational performance. Employing a qualitative approach, the study lays the foundation for a comprehensive understanding of these factors and their intricate relationships. It is important to emphasize that this research currently lacks empirical validation, necessitating further investigations to evaluate the applicability of Dynamic Capabilities, sustainable innovation, and flexibility in predicting organizational performance. Subsequent studies should consider incorporating quantitative methodologies and diverse, representative samples to bolster the generalizability of findings. This study underscores the critical significance of sustainable innovation and flexibility in molding organizational performance, highlighting the imperative need for their integration into sustainable manufacturing strategies. Furthermore, it equips manufacturing company stakeholders with valuable insights to refine their strategic communication pertaining to the advantages of sustainable manufacturing. The research not only offers substantial guidance to policymakers, industry practitioners, and the academic community but also underscores the urgency of further empirical research to confirm and expand upon these conceptual insights.

References

Y. Yunus and M. Novri, “Variasi Arus Listrik terhadap Sifat Mekanik Mikro Sambungan Las Baja Tahan Karat AISI 304,” Widya Eksakta, vol. 1, no. I, pp. 7–11, 2013.

J. Pan, S. Hu, L. Yang, and H. Li, “Simulation and analysis of Heat Transfer and Fluid Flow Characteristics of Variable Polarity GTAW Process Based on a Tungsten-Arc-Specimen Coupled Model,” Int. J. Heat Mass Transf., vol. 96, pp. 346–352, 2016, doi: 10.1016/j.ijheatmasstransfer.2016.01.014.

H. Materials, K. Günther, J. Liefeith, P. Henckell, Y. Ali, and J. P. Bergmann, “Influence of Processing Conditions on The Degradation Kinetics of Fused Tungsten Carbides in Hardfacing,” Int. J. Refract. Metals Hard Mater., vol. 70, pp. 224–231, 2018, doi: 10.1016/j.ijrmhm.2017.10.015.

M. Iqbal and A. Ibrahim, “Analisa Pengaruh Variasi Kampuh Las terhadap Ketangguhan Material Baja AISI 1050,” J. Weld. Technol., vol. 1, no. 2, pp. 26–30, 2019.

H. Z. Oo and P. Muangjunburee, “Wear Behaviour of Hardfacing on 3.5 % Chromium Cast Steel by Submerged Arc Welding,” Mater. Today Proc., vol. 5, no. 3, pp. 9281–9289, 2018, doi: 10.1016/j.matpr.2017.10.101.

S. T. Dwiyati, F. B. Susetyo, and A. D. P. Yudhantono, “Pengaruh Laju Aliran Gas terhadap Nilai Kekerasan dengan Proses GTAW,” J. Konversi Energi dan Manufaktur, vol. 5, no. 1, pp. 1–6, 2018.

J. K. Huang, M. H. Yang, J. S. Chen, F. Q. Yang, Y. M. Zhang, and D. Fan, “The Oscillation of Stationary Weld Pool Surface in The GTA Welding,” J. Mater. Process. Technol., vol. 256, pp. 57–68, 2018, doi: 10.1016/j.jmatprotec.2018.01.018.

R. P. Putra, S. Jokosisworo, and K. Kiryanto, “Pengaruh Arus Listrik dan Temperatur terhadap Kekuatan Tarik dan Impact Alumunium 5083 Pengelasan GMAW (Gas Metal Arc Welding),” J. Tek. Perkapalan, vol. 4, no. 1, pp. 152–161, 2016.

P. T. I. Mudjijana, and M. N. Ilman, “Karakterisasi Pengaruh Kecepatan Las pada Pengelasan MIG AA5083H116 Dengan Elektroda ER5356,” Poros, vol. 15, no. 1, pp. 26–34, 2017.

I. Gunawan, “Pengaruh Diluent Argon terhadap Reaksi Pembakaran Gas Alam (CNG),” J. Ilm. Tek. Mesin “MEKANIK,” vol. 1, no. 1, pp. 1–8, 2015.

L. I. Saputra, U. Budiarto, and S. Jokosisworo, “Analisa Perbandingan Kekuatan Tarik, Impak, dan Mikrografi pada Sambungan Las Baja SS 400 Pengelasan SMAW (Shielded Metal Arc Welding) Akibat dengan Variasi Jenis Kampuh dan Posisi Pengelasan,” J. Tek. Perkapalan, vol. 7, no. 4, pp. 215–226, 2019.

F. Ibriza and W. Elbi, “Perancangan Poros pada Mesin Pengurai Limbah Kelapa Muda,” J. Inov. Penelit., vol. 2, no. 12, pp. 4179–4186, 2022.

Z. Fatoni and M. Lazim, “Perancangan dan Pembuatan Kait Tunggal Jenis Eye Hook dengan Beban 0,5 Ton,” J. Desiminasi Teknol., vol. 5, no. 2, pp. 152–160, 2017.

Downloads

Published

2024-05-26

How to Cite

Ang, H. L., Lada, S., Wang, K., & Li, X. (2024). Influencing Factors Affecting Performance in Sustainable Manufacturing among Malaysian Companies: A Conceptual Study. International Student Conference on Business, Education, Economics, Accounting, and Management (ISC-BEAM), 1(1), 1021–1039. https://doi.org/10.21009/ISC-BEAM.011.72