Announcements

Announcements Jurnal Konversi Energi dan Manufaktur (JKEM) Volume 9 No 2, July 2024

2023-08-25

We invite: Academics, Researchers and Industrial Practitioners to submit scientific papers in the Jurnal Konversi Energi dan Manufaktur (JKEM) Volume 9 No. 2, July 2024.

All articles were published at the Jurnal Konversi Energi dan Manufaktur (JKEM) are Open Access and does not charge Submission fee, APCs and Article Publication Fee (Free) or another fee.

Note: Quota for Volume 9 No. 1, January 2024 has full.

Thank You
Editor in Chief,
Dr. Eng. Agung Premono, S.T., M.T.

Read more about Announcements Jurnal Konversi Energi dan Manufaktur (JKEM) Volume 9 No 2, July 2024

Current Issue

Vol 8 No 2 (2023): JKEM : Jurnal Konversi Energi dan Manufaktur UNJ Vol. 8 No 2 Tahun 2023

SUMMARY. Firmansyah et al., in their paper, conducted local stress analysis using finite element-based software. The study is carried out on the static load that comes from the ship when it is anchored at the harbour. This analysis aims to determine the fender's stress characteristics and maximum stress value. Yuniadi and Kurniawan, in their paper, analyzed the strength and safety factor of the chassis using the finite element method to determine the safety factor in the chassis design that was made. Yusniansyah and Kurniawan, in their paper, designed a dump truck body by adding a larger body capacity than the standard body. The standards used for determining the mass of material to be transported are in accordance with ISO 6483: 1980. Darmawan and Kurniawan, in their paper, determine the wear rate of the brake pad so that the prediction of the service life of the brake pad is known and the factors causing the difference in the wear rate of the brake pad installed on the trailer bogies and motor bogies. Yulianti et al., in their paper, discuss the hydrogen output monitoring system on Fuel Cell Electric Vehicles (FCEV) using the Node-RED software application and regarding flowmeters with RS 232 output. Syaka et al., in their paper, add injectors that aim to improve fuel delivery fuel at high speed, which is expected to boost the power and torque of the standard vehicle. The vehicle used is a motorcycle with a programmed fuel injection (PGM-FI) system for the fuel atomizer. Sugiyanto et al., in their paper, varied the heating temperature and hydraulic pressure on the box and gear moulds using an injection moulding process to produce the maximum mould shape for the box and gear shapes. Basori et al., in their paper, designed a storage rack capable of accommodating and holding a load of gas cylinders and their contents and can be mobilized at a certain height.

Published: 2023-07-12

Table of Contents

Articles

View All Issues