Sintesis Lapisan Tipis Komposit Ni-TiAlN Menggunakan Teknik Elektrodeposisi pada Berbagai Substrat

Muarief Muarief; Esmar Budi; Iwan Sugihartono

Sintesis Lapisan Tipis Komposit Ni-TiAlN Menggunakan Teknik Elektrodeposisi pada Berbagai Substrat

Authors

Muarief Muarief Jurusan Fisika, Universitas Negeri Jakarta Jl. Pemuda No. 10 Rawamangun, Jakarta Timur 13220
Esmar Budi Jurusan Fisika, Universitas Negeri Jakarta Jl. Pemuda No. 10 Rawamangun, Jakarta Timur 13220
Iwan Sugihartono Jurusan Fisika, Universitas Negeri Jakarta Jl. Pemuda No. 10 Rawamangun, Jakarta Timur 13220

Abstract

Composite coating on metal is subjected to improve its wear and corrosion resistances. Electrodeposited Ni-TiAlN composite film using variations of metal or metal alloy type as substrate has been investigated. Variation of substrate type used amount 3 variations that are High Speed Steel (HSS), Brass and Galvanis. On this experiment, the electrolyte composition consist of 0.38 M Ni₂SO₄.6H₂O, 0.17 M NiCl₂.6H₂O and 0.49 M H₃BO₃ added with each 6 gr/liter amounts of TiN and AlN powders and Dodecyl Sulfate Sodium (C₁₂H₂₅NaO₄S) 0.5 gr/liter as sufraktan. The experiment was performed at electrodeposition current of 3.0 mA for about 15 minutes. The results show that the composite film morphology is different in each substrate.

Keywords: Elektrodeposition, Ni-TiAlN composite film, High Speed Steel, Brass, Galvanis.

Downloads

Published

2015-10-30

How to Cite

Muarief, M., Budi, E., & Sugihartono, I. (2015). Sintesis Lapisan Tipis Komposit Ni-TiAlN Menggunakan Teknik Elektrodeposisi pada Berbagai Substrat. PROSIDING SEMINAR NASIONAL FISIKA (E-JOURNAL), 4, SNF2015–VII. Retrieved from https://journal.unj.ac.id/unj/index.php/prosidingsnf/article/view/5182