Pengaruh Pengadukan pada Proses Pelapisan Ni-TiAlN Menggunakan Teknik Elektrodeposisi untuk Perlindungan Bahan Tungsten Karbida Terhadap Korosi

Authors

  • Ade Lina Permatasari Jurusan Fisika, Fakultas Matematika dan Ilmu Pengetahuan Alam Universitas Negeri Jakarta Jl. Pemuda No. 10, Rawamangun, Jakarta 13220
  • Esmar Budi Jurusan Fisika, Fakultas Matematika dan Ilmu Pengetahuan Alam Universitas Negeri Jakarta Jl. Pemuda No. 10, Rawamangun, Jakarta 13220
  • Agus Setyo Budi Jurusan Fisika, Fakultas Matematika dan Ilmu Pengetahuan Alam Universitas Negeri Jakarta Jl. Pemuda No. 10, Rawamangun, Jakarta 13220

Abstract

The research of electrodeposited Ni-TiAlN nanocomposite thin film on tungsten carbide rod as substrate has been investigated. The purpose of this study was to determine the influence of agitation speed in formation of morphology and corrosion resistance. Solution of agitation speed when electrodeposited process at low speed agitation 600r/min, medium speed agitation 900r/min dan high speed agitation 1200r/min. Electrodeposited process was performed at current 3 mA for about 15 minutes. Amount of 6 gr/L of TiN and AlN powders were added into electrolyte solution consist of 0.38 M Ni2SO4.6H2O, 0.17 M NiCl2. 6H2O, 0.49 M H3BO3 and 0.01 gram of Sodium Dodecyl Sulfate. The results show that the nanocomposite thin film morphology is different in each agitation speed.

Keywords: Ni-TiAlN nanocomposite film, electrodeposition, agitation, electrolyte solution.

Downloads

Published

2015-10-30

How to Cite

Permatasari, A. L., Budi, E., & Budi, A. S. (2015). Pengaruh Pengadukan pada Proses Pelapisan Ni-TiAlN Menggunakan Teknik Elektrodeposisi untuk Perlindungan Bahan Tungsten Karbida Terhadap Korosi. PROSIDING SEMINAR NASIONAL FISIKA (E-JOURNAL), 4, SNF2015–VII. Retrieved from https://journal.unj.ac.id/unj/index.php/prosidingsnf/article/view/5187

Issue

Vol. 4 (2015): PROSIDING SEMINAR NASIONAL FISIKA (E-JOURNAL) SNF2015

Section

Articles