OPTIMIZATION OF TCS3200 COLOR SENSOR UTILIZATION IN THE DEVELOPMENT OF AN AUTOMATED SYSTEM FOR COFFEE BEAN SORTING BASED ON DISTANCE DIFFERENCES: OPTIMISASI PEMANFAATAN SENSOR WARNA TCS3200 DALAM PENGEMBANGAN SISTEM OTOMATIS UNTUK PEMILAHAN BIJI KOPI BERDASARKAN PERBEDAAN JARAK

Hanum Puji Pangesti; Hadi Nasbey; Haris Suhendar

doi:10.21009/03.1301.FA07

Authors

Hanum Puji Pangesti Program Studi Fisika, FMIPA Universitas Negeri Jakarta
Hadi Nasbey Program Studi Fisika, FMIPA Universitas Negeri Jakarta
Haris Suhendar Program Studi Fisika, FMIPA Universitas Negeri Jakarta

DOI:

https://doi.org/10.21009/03.1301.FA07

Abstract

The growing demand for high-quality coffee beans has driven the development of automated systems for coffee bean sorting. A critical component in such systems is the color sensor, which provides accurate information to optimize its usage in coffee bean sorting. This study tested the TCS3200 color sensor to optimize its application in the design of an automated coffee bean sorting system based on distance variations. The methodology involved identifying parameters affecting measurement accuracy and adjusting sensor parameters to respond to variations in color using three different colored papers. The sensor's distance was tested within a range of 1 cm to 20 cm, with increments of 0.5 cm. The results indicated that the optimal sensor distances were 16.5 cm, 7.5 cm, and 15 cm for the three different object colors, with an object size of 14.8 cm x 21 cm. These findings will be applied to the development of an automated coffee bean sorting system using Arduino Uno and the TCS3200 color sensor.

References

[1] F. Arlius, M. A. Tjandra, dan D. Yanti, “Analisis Kesesuaian Lahan Untuk Pengembangan Komoditas Kopi Arabika Di Kabupaten Solok,” J. Teknol. Pertan. Andalas, vol. 21, no. 1, hal. 70, 2017, doi: 10.25077/jtpa.21.1.70-78.2017.

[2] Z. Arisandy, T. M. Haykal, dan A. M. Purba, “Rancang Bangun Alat Sortir Bahan Kain Berdasarkan Degradasi Warna Dengan Kontrol Outseal Plc,” Pros. Konf. Nas. Soc. Eng. Polmed, vol. 3, no. 1, hal. 926–933, 2022.

[3] I. Zulkarnain, R. Mukhlis, dan A. Badrul, “Implementasi Alat Pendeteksi Warna Benda Menggunakan Fuzzy Logic dengan Sensor TCS3200 Berbasis Arduino,” J. Teknol. Sist. Inf. dan Sist. Komput. TGD, vol. 2, no. 2, hal. 106–117, 2019.

[4] C. Mamatha, “Optimal Solution for the Smooth Movement of the Emergency Vehicle at the Time of Heavily Congested Traffic Using Traffic Signals and Light Detection,” vol. 2, no. 4, hal. 3048, 2018.

[5] M. S. V. S. R. T. S. M. M. P. Gowtham, “IRJET- Recognition of Emergency Vehicle using Light Detection and Traffic Light Controlling,” Irjet, vol. 8, no. 7, hal. 2498–2502, 2021.

[6] H. M. Hutajulu, A. Yanie, L. Adriana, dan D. Safitri, “Rancang Bangun Deteksi Kematangan Buah Kelapa Sawit Dan Peringatan Berbasis Telegram,” Pros. Semin. Nas. Tek. UISU 2023 Peran Teknol. Berkelanjutan dalam Era Disrupsi, hal. 207– 213, 2023.

[7] M. Rido, “RANCANG BANGUN ALAT UKUR KADAR KLOROFIL DAUN KARET (Hevea brasiliensis) MENGGUNAKAN METODE TRANSMISI CAHAYA,” J. Online Phys., vol. 4, no. 2, hal. 24–33, 2019, doi: 10.22437/jop.v4i2.6374.

[8] T. Ta’ali, W. Khairat, H. Habibullah, dan J. Sardi, “Pengaruh Jarak Terhadap Sensitivitas Sensor Warna TCS3200,” JTEIN J. Tek. Elektro Indones., vol. 4, no. 1, hal. 67–74, 2023, [Daring]. Tersedia pada: http://jtein.ppj.unp.ac.id/index.php/JTEIN/article/view/340.