Ungkapan Duka Cita dalam Bahasa Jepang di Media Sosial
Keywords:
喪失, 悲嘆, ソーシャルメディアAbstract
本論文の目的は、ソーシャルメディアの解説コラムに掲載されている、日本語で
状況が悲しんでいるときに使用される表現を見つけることである。ソーシャルメ
ディアのコメント欄から取得したデータの意味と意味論を説明および分析する現 象
論的方法を使用する。本論文を書いた結論は、日本語での悲嘆の状況がソーシ ャル
メディアのコメント欄に書かれている中に 30 のコメントが選ばれたということに
した。そして、30 のコメントのうち、それぞれが異なる基準と指標に基 づいて悲
嘆の 5 つの段階に入った。悲嘆の 5 つの段階は、受け入れ、拒否、怒り、申し出、
うつ病です。
References
P. S. Souza et al., “Analysis of the surface energy interactions in the tribological behavior of AlCrN and TiAlN coatings,” Tribology International, 2020.
Z. Geng et al., “Tribological behavior of patterned TiAlN coatings at elevated temperatures,” Surface & Coatings Technology, 2019.
H. Elmkhah et al., “Surface characteristics for the Ti-Al-N coatings deposited by high power impulse magnetron sputtering technique at the different bias voltages,” Journal of Alloy and Compounds, 2016.
M. Wang et al., “Surface morphology and tribological properties of DC sputtered nanoscale multilayered TiAlN/CNx coatings,” Tribology International, 2014.
T. Takahashi et al., “Surface Morphology of TiN Films Reactively Deposited by Bias Sputtering,” Vacuum 2000, vol. 59.
O. Zywitzki et al., “Structure of Superhard Nanocrystalline (Ti,Al)N Layers Deposited by Reactive Pulsed Magnetron,” Surface and Coating Technology, 2006.
K. Chakrabarti et al., “Effects of Nitrogen Flow Rates on the Growth Morphology of TiAlN Films Prepared by an RF-Reactive Sputtering Technique,” Thin Solid Films, 2002.
J. Musil and H. Hruby, “Superhard Nanocomposite Ti1-xAlxN Films Prepared by Magnetron Sputtering,” Thin Solid Films, 2000.
W. Liu et al., “Preparation and properties of TiAlN coatings on silicon nitride ceramic cutting tools,” Ceramics International, 2018.
W. Zhou et al., “A comparative research on TiAlN coatings reactively sputtered from powder and from smelting TiAl targets at various nitrogen flow rates,” Applied Surface Science, 2014.
E. Budi, M. Mohd. Razali and A. R. Md. Nizam, “Composition, morphology and mechanical properties of sputtered TiAlN coating,” AIP Conf. Proc., 2014.
E. Budi, M. Mohd. Razali and A. R. Md. Nizam, “Effect of Reactive Sputtering Parameters on TiAlN Nanocoating Structure and Morphology,” AIP Conf. Proc., 2010.
K. Chu, P.W. Shum and Y.G. Shen, “Substrate Bias Effects on Mechanical and Tribological Properties of Substitutional Solid Solution (Ti,Al)N Films Prepared by Reactive Magnetron Sputtering,” Materials Science and Engineering B, 2006.
A. K. Chu et al., “Influences of Bias Voltage on the Crystallographic Orientation of AlN Thin Films Prepared by Long-Distance Magnetron Sputtering,” Thin Solid Films, 2003.
H. Oettel, R. Wiedemann and S. Preiβler, “Residual Stresses in Nitride Hard Coatings Prepared by Magnetron Sputtering and Arc Evaporation,” Surface and Coatings Technology, 1995.
C. He et al., “Microstructure and mechanical properties of reactive sputtered nanocrystalline (Ti,Al)N films,” Thin Solid Films, 2015.
F. Burmeister et al., “Investigation of Structured TiAlN- and TiO2-Coatings with Moth-Eye-Like Surface Morphologies,” Surface & Coatings Technology, 2005.
S. K. Wu, H. C. Lin and P. L. Liu, “An Investigation of Unbalanced-Magnetron Sputtered TiAlN Films on SKH51 High-Speed Steel,” Surface and Coatings Technology, 2000.
H. Klostermann et al., “Nanocomposite Oxide and Nitride Hard Coatings Produced by Pulse Magnetron Sputtering,” Surface Coating Technology, 2005.
A. R. Md. Nizam et al., “Effect of PVD process parameters on TiAlN coatings roughness,” Journal of Mechanical Engineering and Technology, 2010.
Z. L. Liu et al., “Kinetic Monte Carlo Simulation of Deposition of Energetic Copper Atoms on a Cu(001) Substrate,” Journal of Physic D: Applied Physics, 2005.
