PEMANFAATAN ABU SEKAM PADI DAN PLASTIK PET MENJADIPENGGANTI SEBAGIAN AGREGAT HALUS DALAM PEMBUATAN PAVING BLOCK
DOI:
https://doi.org/10.21009/jmenara.v17i2.26082Keywords:
Rice Husk Ash, PET plastic, Paving Block, Compressive StrengthAbstract
This Research aims to utilize waste rice husk ash and PET plastic, in the manufacture of Paving block, Because PET plastic waste has the advantages of not easy to decompose and durable while rice husk ash has the advantage of good binding power, where PET plastic waste does not have the binding power to bind other mixtures, then to cover this deficiency, rice husk ash in combined with PET plastic. The method use in this research is ecxperimental method on paving block by replacing some of the fine aggregate with artificial aggregate with variations 0%, 5%, 10% dan 15% of the weight of the fine aggregate. The test object size is 210 mm x 105 mm x 60 mm. Thpes of the test carried out are visible and sizing test, compressive strength test, wear resistance test dan water absorption test. Testing the compressive strength values for variations of 5%, 10% and 15% respectively are 20 MPa, 17.597 MPa, and 15.927 MPa. Paving blocks with a variation of 5% are included in the B quality, while the paving blocks with a variation of 10% & 15% are not included in the B quality but into the C quality.
References
Andreansyah. (2021). KARAKTERISTIK PAVING BLOCK ABU SEKAM PADI.
Badan Pusat Statistik. (2021). Luas Panen dan Produksi Padi di Indonesia 2020 (Hasil Kegiatan Statistik Pendataan Pertanian Tanaman Pangan Terintegrasi Dengan Metode Kerangka Sampel Area). Badan Pusat Statistik, 1–341.
Bakri, . (2009). Komponen Kimia Dan Fisik Abu Sekam Padi Sebagai Scm Untuk Pembuatan Komposit Semen. Perennial, 5(1), 9. https://doi.org/10.24259/perennial.v5i1.184
Basuki, I., Fikri, lubis muhammad, Ariadi, daulay muda, & A, luthan putri lynna. (2019). Paving block berbasis abu gosok. 5(1), 1–7.
Hadi, L. S., Kencanawati, N. N., & Rawiana, S. (2018). Pemanfaatan Limbah Plastik Polyethylene Terepthalate (PET) untuk Bahan Tambahan Pembuatan Paving Block. Universitas Mataram.
Masbuhin, M. (2020). Pengaruh Subtitusi Lumpur Sidoarjo (Lusi) Terhadap Kuat Tekan Bata Beton (Paving Block). Jurnal Teknika, 12(2), 89. https://doi.org/10.30736/jt.v13i2.476
Mirza, A., Monita, O., & Zulfikar, D. (2017). Kuat Tekan Mortar OPC Abu Sekam Padi Pada Suhu Tinggi. 4(1), 1–5.
Panji, H. (2020). PEMANFAATAN LIMBAH PLASTIK JENIS POLYETHELENE THEREPTALATE (PET) SEBAGAI BAHAN PENGGANTI AGREGAT HALUS PADA PAVING BLOCK.
Rahmadyanti, E. (2003). Uji Kelayakan Pembuatan Paving Block Dari Feasibility Study of Paving Block Fabrication From Waste Pile on Tpa Keputih.
Sabrina, N. A., Wibowo, & Supardi. (2017). Parameter Beton Memadat Mandiri Dengan Kuat Tekan Beton Mutu. 1341–1348.
Sidabutar, A. W. (2020). PEMANFAATAN LIMBAH PLASTIK JENIS PET SEBAGAI SUBTITUSI AGREGAT HALUS UNTUK PAVING BLOCK.
SNI 03-0691. (1996). Bata Beton (Paving Block). Sni 03-0691-1996, 1–9.
SNI 03-2847. (2002). Tata Cara Perhitungan Struktur Beton Untuk Bangunan Gedung (Beta Version).
SNI 03-6820. (2002). SPESIFIKASI AGREGAT HALUS UNTUK PEKERJAAN ADUKAN DAN PLESTERAN DENGAN BAHAN SEMEN (p. 6820).
Victor, & Septianti, B. (2019). Pengaruh Penggunaan Abu Sekam Padi terhadap Sifat Mekanik High Performance Concrete. Prosiding SNST Ke-10, 25–30.
Downloads
Published
Issue
Section
License
Authors who publish with this Journal agree to the following terms:
- Author retain copyright and grant the journal right of first publication with the work simultaneously licensed under a creative commons attribution licensethat allow others to share the work within an acknowledgement of the work’s authorship and initial publication of this journal.
- Authors are able to enter into separate, additional contractual arrangementfor the non-exclusive distribution of the journal’s published version of the work (e.g. acknowledgement of its initial publication in this journal).
- Authors are permitted and encouraged to post their work online(e.g. in institutional repositories or on their websites) prior to and during the submission process, as it can lead to productive exchanges, as well as earlier and greater citation of published works.
