3D Modeling of Existing Toll Roads with Building Information
Abstract
The Toll roads are an important transportation infrastructure to support access and mobility of goods and services. The availability of toll roads is very important in growing the national economy and as access for each region which has a very positive influence on regional growth. On this occasion, we will discuss the use of building information modeling (BIM) applications with existing road requirements, the location where this research takes place is the results of aerial photography on the KM 46 toll road towards the West Karawang toll exit in Karawang Regency. This research uses point cloud data taken from aerial photography. Point cloud data is made by 3D modeling road alignment and topographic survey data processing, then BIM modeling of design results and analysis is carried out in 3D form, after that combining BIM models in one platform to carry out clash detection (check designs that intersect). Once completed, you can create or display a 3D model of the toll road. The result of this research is a three-dimensional modeling of the existing toll road using point cloud data obtained from aerial photographs, and processed with the Building Information Modeling (BIM) application.
Keywords: 3D Modeling, Highway, BIM
References
B. J. Nugroho, I. A. Baskoro and K. W. Widiatmoko, “Penerapan Aplikasi Building Information Modelling (BIM) Pada Proyek Rehabilitasi Dermaga Multifungsi Pulang Pisau,” Teknika, vol. 17, no. 2, pp. 117–126, 2022, doi: 10.26623/teknika.v17i2.5419Peraturan
D. A. Priambodo, M. E. Tjahjadi, and K. T. Suhari, “Pembuatan Model 3D Jalan Raya Bayat Untuk Keperluan Existing Menggunakan Metode Foto Udara (UAV) di Klaten,” Teras Jurnal Teknik Sipil., vol. 12, no. 1, pp. 45-57, 2022, doi: http://dx.doi.org/10.29103/tj.v12i1.654
E. J. Hoppe, F. Novali, A. Rucci, A. Fumagalli, S. D. Conte, G. Falorni, and N. Toro “Deformation Monitoring of Posttensioned Bridges Using High-Resolution Satellite Remote Sensing,” Journal of Bridge Engineering., vol. 24, no. 12, 2019
F. L. Irwani, R. Muryamto, “Implementasi Scan To BIM (Building Information Modelling) Untuk Pemodelan Digital Twin Menggunakan Mobile Laser Scanner Pada Konstruksi Jalan Tol Sumatera (Studi Kasus: Jalan Tol Ruas Terbanggi Besar-Pemalang Panggang Kayu Agung (TBPPKA) STA 23+400 s.d. STA 24+550).,” Tugas Akhir. 2022, url: http://etd.repository.ugm.ac.id/penelitian/detail/213970
F. S. Febriansyah, “Implementasi BIM Pada Proyek Jalan Tol Pasuruan-Probolinggo Seksi 4 Untuk Perhitungan Quantity Take-Off Timbunan,” Agregat., vol. 6, no. 2, 2021, doi: http://dx.doi.org/10.30651/ag.v6i2.9207.g4367
Gaspari, F. Loli, F. Barbieri, F. Belcore, and L. Pinto, “Integration Of Uav-Lidar and Uav-Photogrammetry For Infrastructure Monitoring and Bridge Assessment,” The International Archives of The Photogrammetry, Remote Sensing and Spatial Information Sciences., XLIII, B2, pp. 995-1002, 2022, doi: https://doi.org/10.5194/ISPRS-ARCHIVES-XLIII-B2-2022-995-2022
H. Susilo, M. N. Bani, and A. N. Fajarwati, “Analisis Pengaruh Jumlah GCP (Ground Control Point) Terhadap Akurasi Peta Orthofoto Pada Jalan Yang Berkarakter Curam Dengan Tikungan Tajam Hasil Pemotretan Udara Metode UAV-Fotogrametri,” Qua Teknika., vol. 12, no. 1, 2022, doi : https://doi.org/10.35457/quateknika.v13i1:2723
ISO, 19650-1, 2018“Organization and digitization of information about buildings and civil engineering works, including building information modelling. The International Organization for Standarization.”
L. Siburian, I. Gumilar, and D. Wisayantono, “Pemodelan 3D Jembatan Cisomang Menggunakan Metode Terrestrial Laser Scanner,” ITB Indonesian Journal of Geospasial., vol. 6, no. 1, pp. 1-10, March. 2017, doi: 10.12928/telkomnika.v17i3.10167
M. Fauzi, “Pemetaan Multi-Bencana Pada Jalur Kereta Api Lintas Selatan Dari Sta. Wates-Sta. Kutowinangun,” Menara: Jurnal Teknik Sipil., vol. 16, no. 2, 2021, doi: https://doi.org/10.21009/jmenara.v16i2
M. N. Bani, “Analisis Kerapatan 3D Point Clouds Pada UAV Fotogrametri,” Qua Teknika., vol. 12, no. 1, 2022, doi: https://doi.org/10.35457/quateknika.v12i01.2107
M. Apriansyah, H. Harintaka, “Pembuatan Model 3D Bangunan LoD3 Dengan Pemanfaatan Foto Udara dan Fotogrametri Terrestris,” Geoid., vol. 18, no. 2, 2023, doi : http://dx.doi.org/10.12962/j24423998.v18i2.14673
M. Dowaiy, D. Baranyai, A. Somogyi, R. Vrbovszki, and T. Lovas, “Comparative Analysis of Road Scanning Techniques,” Nova Geosida., vol. 3, no. 1, pp. 111, 2023
Peraturan Pemerintah Republik Indonesia Nomor 15 Tahun 2005 tentang Jalan Tol
R. Yudhistira, M. E. Tjahjadi, and A. Noraini, “Pemodelan 3D Existing Jalan Raya Dengan Pemotretan Foto Udara (UAV),” ITN Malang., 2018, uri: http://eprints.itn.ac.id/id/eprint/1062
Surat Edaran Dirjen Bina Marga Nomor 11/SE/Db/2021, tanggal 19 Juli 2021, tentang Penerapan BIM Dalam Perencanaan Teknis, Konstruksi, dan Pemeliharaan Jalan & Jembatan di Lingkungan Direktorat Jenderal Bina Marga, Peran & Tanggung Jawab Business Owner/BUJT (Jasa Marga) Dalam Implementasi BIM
Copyright (c) 2023 Bahar Amal, Dicki Dian Purnama
This work is licensed under a Creative Commons Attribution-ShareAlike 4.0 International License.
Authors who publish with this Journal agree to the following terms:
- Author retain copyright and grant the journal right of first publication with the work simultaneously licensed under a creative commons attribution licensethat allow others to share the work within an acknowledgement of the work’s authorship and initial publication of this journal.
- Authors are able to enter into separate, additional contractual arrangementfor the non-exclusive distribution of the journal’s published version of the work (e.g. acknowledgement of its initial publication in this journal).
- Authors are permitted and encouraged to post their work online(e.g. in institutional repositories or on their websites) prior to and during the submission process, as it can lead to productive exchanges, as well as earlier and greater citation of published works.
