Sistem Manajemen dan Biaya K3 Bangunan Gedung LP3M UNESA

Authors

Alwan Gangsar Brilian Putra Universitas Negeri Surabaya
Yusfira Afrianti Haq Institut Teknologi Sepuluh Nopember

DOI:

https://doi.org/10.21009/jmenara.v19i2.46637

Keywords:

Manajemen Risiko, PenerapanRencana Kesehatan dan Keselamatan Kerja Kontrak (RK3K), PenerapanSistem Manajemen Kesehatan dan Keselamatan Kerja (SMK3), Struktur Atas

Abstract

The implementation of the Construction Occupational Health and Safety Management System (COHSMS) through the Occupational Health and Safety Contract Plan (OHS) aims to improve building quality and worker safety. Occupational Health and Safety Contract Plan (OHS) serves as a safety guideline in the execution of upper structure work in the Project for Constructing the Learning Development and Quality Assurance Institute Building at the State University of Surabaya. This study designs an Occupational Health and Safety Contract Plan (OHS) specifically for upper structure work in the aforementioned project. The hazard identification, risk assessment, and risk con,trol processes in the safety planning are conducted using the Hazard Identification, Risk Assessment, and Risk Control (HIRARC) method in accordance with Ministry of Public Works Regulation No. 05 of 2014. This study analyzes hazard identification using the HIRARC method and calculates the costs incurred in the project. The results of this study can serve as an example for enhancing attention and implementation of health and safety practices in superstructure work for future projects, in accordance with good building planning standards.

References

Ahn, H., Son, S., Park, K., dan Kim, S. (2022). “Cost Assessment Model for Sustainable Health and Safety Management of High-rise Residential Buildings in Korea.” Journal of Asian Architecture and Building Engineering, 21(3), 689–700.

Boadu, E. F., Wang, C. C., dan Sunindijo, R. Y. (2020). “Characteristics of the Construction Industry in Developing Countries and its Implications for Health and Safety: An Exploratory Study in Ghana.” International Journal of Environmental Research and Public Health, 17(11), 1–21.

BPS. (2019). Indikator Konstruksi, Triwulan IV-2019. Badan Pusat Statistik (BPS).

ButarButar, F. T. S., Mardiaman, dan Hariyadi, E. S. (2023). “Analisis Identifikasi Bahaya Aspek K3L dalam Proyek Konstruksi Menggunakan Metoda Analitycal Hierarchy Process (AHP).” Menara : Jurnal Teknik Sipil, 18(2), 115–121.

Da Silva, S. L. C., dan Amaral, F. G. (2019). “Critical Factors of Success and Barriers to the Implementation of Occupational Health and Safety Management Systems: A Systematic Review of Literature.” Safety Science, 117, 123–132.

Gamayunova, O. dan Spitsov, D. (2020). “Technical Features of the Construction of Highrise Buildings.” E3S Web of Conferences, 164.

Harahap, I. M., Firdasari, dan Purwandito, M. (2022). “Melalui Metode Hiradc dan Metode JSA Pada Proyek Lanjutan Pembangunan Rumah Sakit Regional Langsa.” Menara : Jurnal Teknik Sipil, 17(2), 43–50.

ILO. (2015). International Labour Organisation.

Jukka, P. H., Tan, T., dan Kiat, B. (2017). Global Estimates of Occupational Accidents and Work-Related Illnesses 2017.

Mir, M. M., Khan, Z., dan Student, P. G. (2018). “International Research Safety Challenge in Safety Challenge in High Rise Building.” Volume International Journal of Trend in Scientific Research and Development (IJTSRD) International Open Access Journal, 2(4), 1829–1825.

NIOSH. (2015). Hierarchy of Control. National Institute for Occupational Safety and Health (NIOSH) .

Novtantino, B. (2022). “Work Safety Risk Analysis Using Hirarc Method In Iron Production Area PT. Java Rakindo.” Al Qalam: Jurnal Ilmiah Keagamaan dan Kemasyarakatan, 16(5), 1611.

Peraturan Menteri Pekerjaan Umum dan Perumahan Rakyat Nomor 05/PRT/M/2014 Tahun 2014 tentang Pedoman Sistem Manajemen Keselamatan dan Kesehatan Kerja (SMK3) Konstruksi Bidang Pekerjaan Umum (2014).

Primasari, D. A., Denny, M. H., dan Ekawati. (2016). “Penerapan Hazard Identification Risk Assessment and Risk Control (HIRARC) sebagai Pengendalian Potensi Kecelakaan Kerja di Bagian Produksi Body Bus PT. X Magelang.” Jurnal Kesehatan Masyarakat, 4(1), 2356–3346.

Ramlee, U. S., Hilmi, M., dan Rahim, I. A. (2023). “Hazard Identification, Risk Assessment and Risk Control (HIRARC) of Safety and Health Hazards at Old High-Rise Residential Building Facilities: Case Study at Larkin Jaya Flat, Johor Bahru.” Research in Management of Technology and Business, 4(1), 1335–1344.

Safira, S., dan Ramdhan, D. H. (2020). Inclusion of Construction Occupational Health and Safety Management System (OHSMS) Components in Building Construction Project. Jurnal Nasional Kesehatan dan Keselamatan Kerja.

Surat Edaran Biaya Penyelenggaraan Sistem Manajemen Keselamatan dan Kesehatan Kerja (SMK3) Konstruksi Bidang Pekerjaan Umum (2015).

Winge, S., Albrechtsen, E., dan Mostue, B. A. (2019). “Causal Factors and Connections in Construction Accidents.” Safety Science, 112, 130–141.

Wong, C. F., Teo, F. Y., Selvarajoo, A., Tan, O. K., dan Lau, S. H. (2022). “Hazard Identification Risk Assessment and Risk Control (HIRARC) for Mengkuang Dam Construction.” Civil Engineering and Architecture, 10(3), 762–770.

Yiu, N. S. N., Chan, D. W. M., Sze, N. N., Shan, M., dan Chan, A. P. C. (2019). “Implementation of Safety Management System for Improving Construction Safety Performance: A Structural Equation Modelling Approach.” Buildings, 9(4).

Yoon, S. J., Lin, H. K., Chen, G., Yi, S., Choi, J., dan Rui, Z. (2013). “Effect of Occupational Health and Safety Management System on Work-Related Accident Rate and Differences of Occupational Health and Safety Management System Awareness Between Managers in South Korea’s Construction industry.” Safety and Health at Work, 4(4), 201–209.

Downloads

Published

2024-07-17

Issue

Vol. 19 No. 2 (2024): Menara : Jurnal Teknik Sipil

Section

Artikel

License

This work is licensed under a Creative Commons Attribution-ShareAlike 4.0 International License.

Authors who publish with this Journal agree to the following terms:

Author retain copyright and grant the journal right of first publication with the work simultaneously licensed under a creative commons attribution licensethat allow others to share the work within an acknowledgement of the work’s authorship and initial publication of this journal.
Authors are able to enter into separate, additional contractual arrangementfor the non-exclusive distribution of the journal’s published version of the work (e.g. acknowledgement of its initial publication in this journal).
Authors are permitted and encouraged to post their work online(e.g. in institutional repositories or on their websites) prior to and during the submission process, as it can lead to productive exchanges, as well as earlier and greater citation of published works.