ANALISIS PENGARUH VARIASI CDI DAN BUSI TERHADAP PERFORMA DAN KONSUMSI BAHAN BAKAR PADA MOTOR VESPA STRADA
Influence Analysis of CDI and Spark Plug Variation on Performance and Fuel Consumption of Vespa Strada Motors
DOI:
https://doi.org/10.21009/JKEM.8.1.2Keywords:
CDI Variation, Spark Plug Variation, Engine PerformanceAbstract
In current developments, CDI ignition systems are widely used in motorcycle vehicles. This study aims to determine the effect of using variations of CDI Limiter and CDI unlimiter with spark plugs on torque, power, and fuel consumption using pertamax fuel. The research method is an experimental research method, carried out on a Vespa Strada 150 CC motorcycle. Research data obtained from tests using a dynamometer to determine the value of torque and power generated which will later be analyzed by directly observing the experimental results then drawing conclusions and determining the results of research conducted in the form of tables and diagrams, while for testing fuel consumption using measuring cup and calculating fuel consumption. Based on this report, shows that there are differences in torque, power, and fuel consumption produced. The highest torque value is found in the CDI unlimiter variation with platinum spark plugs at a rotating speed of 11000 rpm producing a torque of 7.09 Nm, while the highest power value is also found in the CDI unlimiter variation with Platinum Spark Plugs at 11000 rpm of rotating speed producing power of 10.7 HP and fuel consumption (SFC) the highest value was obtained in the CDI Limiter variation with platinum spark plugs at 11000 rpm resulting in an SFC of 0.67 L/HP.h.
References
[2] A. Pujiono and T. Fitriyanto, “Modifikasi Sistem Pengapian Konvensional Platina Menjadi Sistem Pengapian CDI Pada Motor Honda CB Tahun 1977,” Surya Tek. J. Ilm. Tek. Mesin, vol. 3, no. 1, pp. 36–44, 2018.
[3] J. Jamaludin and Y. Nurrohman, “Pengaruh Penggunaan Cdi Standar Dan CDI Racing Terhadap Daya Dan Torsi Motor Bensin 110 cc Dengan Bahan Bakar Pertalite,” Mot. Bakar J. Tek. Mesin, vol. 3, no. 2, pp. 2–5, 2019, doi: 10.31000/mbjtm.v3i2.3336.
[4] S. Gafar, I. Gunawan, and I. Usman, “Pengaruh Penggunaan CDI Standar dan CDI Racing Tipe Juken 5 dengan Menggunakan Bahan Bakar Pertalite Terhadap Unjuk Kerja Motor Bakar Yamaha Mio M3 125 cc,” J. Din. Tek. Mesin Unkhair, vol. 6, no. 1, pp. 16–22, 2021.
[5] H. Priyatno and J. V. Tuapetel, “Perbandingan Unjuk Kerja Dan Konsumsi Bahan Bakar Motor Yang Memakai CDI Limiter Dan CDI Unlimiter,” J. Tek. Mesin-ITI, vol. 1, no. 2, pp. 67–70, 2017.
[6] R. Eki and M. B. R. Wijaya, “Pengaruh Stroke Up Terhadap Performa Mesin Dan Emisi Pada Yamaha Jupiter Z Dengan Menggunakan Variasi Bahan Bakar,” Automot. Sci. Educ. J., vol. 9, no. 1, pp. 25–30, 2020.
[7] K. Tarigan, “Analisa Pengaruh Stroke Terhadap Performa Mesin Empat Langkah Kapasitas 150 CC Bahan Bakar Pertamax 92, Pertamax Turbo 98 dan Bensol Terhadap Data dan Konsumsi Bahan Bakar,” J. Ilm. Core IT Community Res., vol. 7, no. 2, pp. 233–239, 2019.
[8] A. Gurnito and B. Sudarmanta, “Pengaruh Ignition Timing Mapping Terhadap Unjuk Kerja dan Emisi Engine Sinjai 650 CC Berbahan Bakar Pertalite RON 90,” J. Tek. POMITS, vol. 1, no. 1, pp. 1–6, 2016.
[9] S. Ramdani, “Analisis Pengaruh Variasi CDI Terhadap Performa Dan Konsumsi Bahan Bakar Honda Vario 110cc,” J. Tek. Mesin, vol. 4, no. 3, pp. 28–32, 2017.
[10] T. Chandra, Martias, and T. Sugiarto, “Pengaruh CDI Digital Power Max Hyper Band Terhadap Konsumsi Bahan Bakar Dan Kandungan Emisi Gas Buang Pada Sepeda Motor 4 Langkah,” Automot. Eng. Educ. J., vol. 4, no. 2, pp. 1–12, 2014.
