STRUCTURAL DESIGN STUDY OF ABUTMENTS USING BORED PILE FOUNDATIONS BRIDGE BESUK BONDOWOSO

M. Rifki Alfaries; Ilanka Cahya Dewi; Arief Alihudien; Hilfi Harisan Ahmad; Jimi Amijaya

doi:10.21009/jpensil.v15i1.61668

Authors

M. Rifki Alfaries Department of Civil Engineering, Faculty of Engineering, Muhammadiyah University of Jember
Ilanka Cahya Dewi Department of Civil Engineering, Faculty of Engineering, Muhammadiyah University of Jember
Arief Alihudien Department of Civil Engineering, Faculty of Engineering, Muhammadiyah University of Jember
Hilfi Harisan Ahmad Department of Civil Engineering, Faculty of Engineering, Muhammadiyah University of Jember
Jimi Amijaya Department of Civil Engineering, Faculty of Engineering, Muhammadiyah University of Jember

DOI:

https://doi.org/10.21009/jpensil.v15i1.61668

Keywords:

Abutment, Bored Pile Foundation, Bridge, Bored Pile Load Capacity

Abstract

This study aims to analyze and plan the abutment structure with bored pile foundations on the Besuk Bridge in Klabang District, Bondowoso Regency, East Java. The analysis was conducted to ensure the bearing capacity of the bored piles against axial and lateral loads in accordance with SNI 1725:2016 and SNI 2833:2016. The data used includes soil data from field investigations, shop drawings, and structural design parameters. The calculation process includes determining load combinations, analyzing axial bearing capacity (end resistance and skin friction), and the lateral capacity of piles against horizontal forces due to wind and earthquakes. The analysis results show that the total axial bearing capacity of the foundation is 10,465.26 kN, with a maximum load occurring on the pile of 1,262.56 kN, which is still below the allowable capacity. Meanwhile, the results of the lateral load control show that all load combinations produce lateral forces (Tx and Ty) that are smaller than the allowable capacity. Based on these results, the bored pile foundation with a diameter of 0.8 m and a depth of 10 m is deemed safe to withstand both axial and lateral loads. Thus, the design of the abutment structure and bored pile foundation for the Besuk Bridge meets the stability and strength criteria in accordance with applicable design standards.

References

A. iyan saputra. (2023). Analisis Kestabilan Abutment Jembatan Leppu Ii Kab.Sumnawa. Jurnal Informasi, Sains Dan Teknologi, 6(02), 136–142. https://doi.org/10.55606/isaintek.v6i02.134

Alihudien, A., Alfaries, M. R., & Rizal, N. S. (2025). Simulation of the Potential Liquification of Puger Sand Soil on a Small Scale in the Laboratory. Rekayasa Sipil, 19(2), 219–224. https://doi.org/10.21776/ub.rekayasasipil.2025.019.02.10

Badan Standarisasi Nasional. (2016). Standar Nasional Indonesia Perencanaan jembatan terhadap beban gempa. Sni 2833:2016, 1–70. www.bsn.go.id

Candra, A. I. (2018). Analisis Daya Dukung Pondasi Strous Pile Pada Pembangunan Gedung Mini Hospital Universitas Kadiri. UKaRsT, 1(1), 27. https://doi.org/10.30737/ukarst.v1i1.83

Fataruba, M. Z., Hamkah, H., & Jakob, J. C. (2025). Perhitungan Abutment Dan Fondasi Jembatan Ake Samo Pada Ruas Jalan Saketa-Dehepodo Kabupaten Halmahera Selatan Provinsi Maluku Utara. Jurnal Penelitian Multidisiplin Bangsa, 1(8), 1588–1599. https://doi.org/10.59837/jpnmb.v1i8.308

Halawa, L. A., Sari, K. I., & Tanjung, D. (2023). Analisis Stabilitas Abutment Pada Pergantian Jembatan Idanetae Loloseni Di Ruas Jalan Hilimbowo Kabupaten Nias Selatan. Buletin Utama Teknik, 18(2), 117–120. https://doi.org/10.30743/but.v18i2.6640

Hariyanto, B., Alpid, A., Rosdiyani, T., & Abadi, M. K. (2024). Studi Kasus Analisis Daya Dukung Abutment Terhadap Beban Jembatan Sukadana 1 Kecamatan Kasemen. Journal of Sustainable Civil Engineering (JOSCE), 6(02), 141–150. https://doi.org/10.47080/josce.v6i02.3254

Hariyanto, B., Samudin, S., Rosdiyani, T., & Abadi, M. K. (2024). Perencanaan Struktur Abutment Dan Pondasi Jembatan Panosogan Kecamatan Cikeusal Kabupaten Serang. Journal of Sustainable Civil Engineering (JOSCE), 6(01), 44–57. https://doi.org/10.47080/josce.v6i01.3324

I Wayan Jawat, Putu Panji Tresna Gita, & I Made Satria Dharmayoga. (2020). Kajian Metoda Pelaksanaan Pekerjaan Pondasi Bored Pile Pada Tahap Perencanaan Pelaksanaan. PADURAKSA: Jurnal Teknik Sipil Universitas Warmadewa, 9(2), 126–142. https://doi.org/10.22225/pd.9.2.1830.126-142

Jarwoto, J., & Azizul Hakim, E. (2021). Analisa Desain Bangunan Pengendali Sedimen Jembatan Plapar, Slahung, Ponorogo. Seminar Keinsinyuran Program Studi Program Profesi Insinyur, 1(2), 847–856. https://doi.org/10.22219/skpsppi.v2i1.4396

Jiang, S., & Billah, A. M. (2025). Finite element simulation and parametric study of exposed column base plate connections under axial compression and Bi-directional lateral loading. Journal of Building Engineering, 111(April), 113188. https://doi.org/10.1016/j.jobe.2025.113188

Kartikasari, D., & Sanhadi, D. (2019). Studi Evaluasi Pondasi Tiang Pancang (Spun Pile) Dengan Pondasi Tiang Bor (Bored Pile) Pada Gedung Kantor Pemerintah Kabupaten Lamongan. UKaRsT, 3(2), 31. https://doi.org/10.30737/ukarst.v3i2.602

Latumahina, J., Hamkah, & Kumbangsila, R. (2025). Kajian_Pelaksanaan_Analisis_Struktur_Bangunan_Bawa. Jurnal Penelitian Multidisiplin Bangsa, 1(8), 995–1002.

Liao, M., Yang, Y., Li, Z., Zhao, C., Huang, S., Huang, X., & Xie, M. (2025). Vibration Analysis of Large Cantilevered Sidewalks on a Spatial X-Shaped Tie Arch Bridge Considering Human–Vehicle–Structure Interactions. KSCE Journal of Civil Engineering, 100367. https://doi.org/10.1016/j.kscej.2025.100367

Muhammad Yusuf, & Fahmy Hermawan. (2024). Comparison Analysis of Existing Bridge Design Based on Bms 1992 and Sni 1725-2016. International Journal on Livable Space, 8(2), 43–52. https://doi.org/10.25105/livas.v8i2.19483

Mukhlisin, M., Rahmawati, D., & Tutako, B. (2019). Analisis Penerapan Sistem Manajemen K3 Pada Proyek Pembangunan Jembatan Kol Sunandar Di Perbatasan Kabupaten Demak – Kudus. Urnal Tugas Akhir USM Semarang, Jawa Tengah, 1–14. https://repository.usm.ac.id/files/journalmhs/C.131.15.0239-20190903031142.pdf

Nahla, A., Zainuddin, & Suji’at. (2022). Perencanaan Abutment Jembatan Glendeng Kabupaten Tuban. Jurnal Teknik Sipil, 7(1), 71–89. https://doi.org/10.56071/deteksi.v7i1.402

Pormes, S. C., Frans, P. L., Pormes, S. C., Frans, P. L., & Tahya, H. (2025). Tinjauan Daya Dukung Abutment pada Jembatan Gantung Pantai Ina Marina Maluku Tengah Reveiw of the Abutment Bearing Capacity on the Ina Marina Suspension Bridge , Central Maluku. 2(3), 245–258.

Pranata, R. B., & Priyono, P. (2022). Jurnal Smart Teknologi Study Redesain Dimensi Abutmen Jembatan Kironggo Bondowoso Akibat Perbedaan Periode Getar Dan Kelas Situs Tanah Redesign Study Of The Abutment Dimension Of The Kironggo Bondowoso Bridge due To Differences Of Vibration Period And Soil Site Class Jurnal Smart Teknologi. 3(3), 224–232.

Putri, M. G. (2022). Analisis Stabilitas Abutment (Studi Kasus: Jembatan Bandar Agung - Lawang Agung, Empat Lawang, Sumatera Selatan).

Rachman, D. A., & Hendrayana, Y. (2019). Metode Pelaksanaan Pekerjaan Struktur Bawah Jembatan Ciheum Kecamatan Lemahsugih Kabupaten Majalengka. Seminar Teknologi Majalengka 4.0, 2018, 169–176.

Ramdhany, M., & Permana, S. (2021). Analisis Daya Dukung dan Penurunan Pondasi Bored Pile Menggunakan Nilai Standard Penetration Test (SPT) pada Proyek Pembangunan Kereta Cepat Indonesia China. Jurnal Konstruksi, 19(1), 212–218. https://doi.org/10.33364/konstruksi/v.19-1.929

Rizky, B. M. (2022). Perencanaan Ulang Fondasi Tiang Pancang Pada Abutment Jembatan Jalan Planjan–Baron–Tepus Yogyakarta. Jurnal Online Skripsi …, 3, 40–47. http://jurnal.polinema.ac.id/index.php/jos-mrk/article/view/1085

Rizqi, M. F., Sholeh, M., & ... (2022). Desain Ulang Struktur Bawah Jembatan Karanggongso I Sta 6+ 365 Pada Proyek Jls Lot 6. Jurnal Online Skripsi …, 3, 320–326. http://jurnal.polinema.ac.id/index.php/jos-mrk/article/view/1126

Rohadi, S., Ariadi, D., & Mochtar, B. (2018). Perencanaan Struktur Bangunan Bawah Abutment Jembatan Desa Sekerat Kecamatan Bengalon Kabupaten Kutai Timur. Ejurnal.Untag-Smd.Ac.Id, 1–16.

Rohmawati, R. F., Purnama Putra, P., Nurtjahjaningtyas, I., Sipil, J. T., Teknik, F., Jember, U., Kalimantan, J., & 37 Jember, N. (2022). Evaluasi Rancangan Abutment Jembatan Sungai Desa Kendalbulur Kecamatan Boyolangu Kabupaten Tulungagung. Jurnal Teknik Sipil, 11(1), 2022–2062.

Rumahlaiselan, N. V., & Siahaya, V. T. C. (2024). Analisis Struktur Bangunan Bawah pada Jembatan Way Lawa Tawiri Kota Ambon Analysis of the Lower Structure of the Way Lawa Tawiri Bridge in Ambon City. 1(2), 272–279.

Sadad, Ilyas, Fery Hendi Jaya, and I. W. J. (2024). “Implementasi BIM Take Off Quantity Material Struktur Abutment Jembatan Terhadap Volume Rencana.” Teknika Sains: Jurnal Ilmu Teknik 7.2 (2022): 91-97. 01(02), 51–60.

Sartika, D., Herbudiman, B., & Pribadi, A. (2019). Studi Komparasi Pembebanan Analisis Jembatan Cibaruyan dengan Pembebanan Jembatan Berdasarkan RSNI T-02-2005 dan SNI 1725:2016. RekaRacana: Jurnal Teknil Sipil, 5(4), 75. https://doi.org/10.26760/rekaracana.v5i4.75

Sudjani, & Putra, W. E. (2025). Digital Transformation in Career Guidance Services. Jurnal PenSil, 14(3), 518–530. https://doi.org/10.21009/jpensil.v14i3.59152

Susanto, A., Renaningsih, & Candrarini, R. A. (2020). Perencanaan Fondasi Tiang Bor Abutment Jembatan Kali Kendeng. Dinamika Teknik Sipil, 13(1), 1–6.

Suwana, I. M. (2022). Analisis Kapasitas Dukung Dan Penurunan Pondasi Minipile (Studi Kasus : Abutment Jembatan Kali Puith Sempor Kebumen Jawa Tengah).

Tampubolon, G., Roesyanto, R., & Hasibuan, G. C. R. (2024). Analisis Daya Dukung & Penurunan Bored Pile 80cm di Proyek Kompleks Kantor-Apartemen dengan Metode Analitis & Elemen Hingga. Jurnal Syntax Admiration, 5(4), 1249–1266. https://doi.org/10.46799/jsa.v5i4.1102

Wahyuddin, M., Siregar, A. M., & Afriani, L. (2020). Analisis dan Perencanaan Pondasi Tiang Bored Pile pada Jembatan Jalur Ganda Kereta Api Bekri Kabupaten Lampung Tengah. Jurnal Rekayasa Sipil Dan Desain, 7(4), 495–504. https://doi.org/10.23960/jrsdd.v7i4.1220

Warouw, P. J. N., Rangkang, J., & Saerang, E. J. (2022). Analisis Daya Dukung Pondasi Bored Pile Jembatan Kalasey dengan Tes PDA pada Jalan Manado Outer Ringroad III STA 9+799. Prosiding Seminar Nasional Produk Terapan Unggulan Vokasi Politeknik Negeri Manado, 1(1), 296–306. https://jurnal.polimdo.ac.id/index.php/semnas/article/view/394

Wei, K., Wang, J., & Xing, S. (2025). Numerical Investigation into Abrasion Damage of Two Adjacent Cylindrical Concrete Bridge Piers Located in a Mountain Stream Abstract Abrasive erosion induced by a mixture of fluid flow and fine particles is a typical type of bridge. KSCE Journal of Civil Engineering, 100407. https://doi.org/10.1016/j.kscej.2025.100407

Wisnu, W. F. D. S., Meriana Wahyu Nugroho, Titin Sundari, & Totok Yulianto. (2025). Evaluasi Kekuatan Abutment Terhadap Daya Dukung Tanah Pada Jembatan Dengan Metode Terzaghi. Media Konstruksi, 10(1), 95–104. https://doi.org/10.33772/jmk.v10i1.91

Yasin, M., Yanti, G., & Wahyuni Megasari, S. (2019). Analisis Abutment Jembatan Sei. Busuk Kabupaten Siak Sri Indrapura Provinsi Riau. SIKLUS: Jurnal Teknik Sipil, 5(1), 52–62. https://doi.org/10.31849/siklus.v5i1.2384

Yus, B. E., Prihatin, K., & Kamil, I. (2021). Perencanaan Kapasitas Dukung Dan Penurunan Pada Tiang Bor (Studi Kasus Jembatan Ritan Kecamatan Tabang Kabupaten Kutai Kartanegara). SNITT- Politeknik Negeri Balikpapan, 5, 146–155.

Zhao, C., Zhang, J., Zhao, C., Wu, Y., & Wang, Y. (2023). Cavity reverse expansion considering elastoplastic unloading and application in cast-in-situ bored piles. Soils and Foundations, 63(4), 101339. https://doi.org/10.1016/j.sandf.2023.101339