Studi Tentang Guru Yang Telah Bersertifikasi Kompetensi Dalam Meningkatkan Motivasi Belajar Siswa

Studi Kelas XI Mata Pelajaran Produktif Program Keahlian Teknik Gambar Bangunan di SMKN 26

Authors

  • State University of Jakarta
  • State University of Jakarta

DOI:

https://doi.org/10.21009/jpensil.v4i2.9876

Abstract

This study aims to find a teacher who has certified competencies in enhancing student’s motivation in class grade XI building drawing engineering program in SMK 26 Jakarta.

            Place of research conducted in class grade XI building drawing engineering program year 2010/2011 in SMK 26 Jakarta. The research method is descriptive research method with a survey approach with 50 samples of student. Data increase student’s motivation is obtained through a questionnaire with Likert scale. The results showed that 34 grains obtained valid and true statement.

            The results of this study was obtained by converting the average score in the rating scale between 1 (very low) to 4 (very good), 4 indicators of interpretation has declared open communication among less well at 2.49, a prerequisite for 2.25, novelty at 2.34 and pleasant conditions of 2.50. Meanwhile, four other indicators of interpretation has expressed good enough for them meaningfulness 2.91, 2.80 for modeling, training / practice an active and useful for training are divided by 2.68 and 2.95.

            The conclusion of this study is overall of eight indicators that the parameters a certified teacher effort in improving student's motivation is still not meet the standards of good or satisfaction. Need to be repaired and enhanced the performance or the ability of teachers to teach in the process of teaching and learning activity in the classroom in order to produce a better quality of teaching and learning activity in the classroom and more satisfactory learning outcomes

References

Agung Pambudi, Hari. Kompetensi Guru.
http://haripambudi.blogspot.com/2009/09/kompetensi-guru.html
(tgl. akses 04-11-2011)

Arikunto Suharsimi. Prosedur Penelitian Suatu Pendekatan Praktek.
Jakarta : PT. Rineka Cipta, 2006.

Hamalik, Oemar. Perencanaan Pengajaran Berdasarkan Pendekatan Sistem.
Jakarta : PT. Bumi Aksara, 2008.

Haryanto. Hubungan Antara Persepsi Siswa Tentang Kompetensi Mengajar
Mahasiswa PPL dengan Motivasi Belajar Siswa. Skripsi. Universitas
Negeri Jakarta, 2003.

Imron Ali. Belajar dan Pembelajaran. Jakarta : PT. Pustaka Jaya, 1996.

Kunandar. Guru Profesional Implementasi KTSP dan Sukses Dalam Sertifikasi
Guru. Jakarta : PT. Raja Grafindo Persada, 2007.

Lampung Post. Kualitas Guru Rendah, Masalah Penting Pendidikan.
http://www.lampungpost.com/cetak/berita.php?id=20099040606275420
(tgl. akses 05-08-2010)

Mulyasa, E. Standar Kompetensi dan Sertifikasi Guru. Bandung : PT. Remaja
Rosda Karya, 2008.

PP. RI No.74 Tentang Guru

Sardiman, A.M. Interaksi dan Motivasi Belajar Mengajar. Jakarta : PT. Raja
Grafindo Persada, 2006.

Sunarto. Pengertian Motivasi Belajar.
http://sunartombs.wordpress.com/2008/09/23/motivasi-belajar
(tgl. akses 10-01-2012)

Sudjana. Metoda Statistika. Bandung : PT. Tarsito, 1992.

Syah, Muhibin. Psikologi Pendidikan Dengan Pendekatan Baru. Bandung : PT.
Remaja Rosda Karya, 2008.

Uno, Hamzah B. Teori Motivasi dan Pengukurannya Analisis di Bidang
Pendidikan. Jakarta : PT. Bumi Aksara, 2007.

UU No.14 tahun 2005 tentang Guru dan Dosen

Wardhani, Nurul. Peran Guru Dalam Meningkatkan Motivasi belajar Siswa.
Makalah. Bagian Psikologis Klinis. Fakultas Psikologi UNPAD
Jatinangor, 2005 http://www.pdfchaser.com/PERAN-GURU-DALAM-MENINGKATKAN-MOTIVASI-BELAJAR-SISWA.html#
(tgl. akses 25-01-2011)

Widyoko, S. Eko Putro. Analisis Pengaruh Kinerja Guru Terhadap Motivasi
Belajar Siswa. http://umpwr.ac.id/web/download/publik
(tgl.akses 15-12-2010)

Published

2015-08-27

How to Cite

Mochammad, & Santoso Sri. (2015). Studi Tentang Guru Yang Telah Bersertifikasi Kompetensi Dalam Meningkatkan Motivasi Belajar Siswa: Studi Kelas XI Mata Pelajaran Produktif Program Keahlian Teknik Gambar Bangunan di SMKN 26. Jurnal Pensil : Pendidikan Teknik Sipil, 4(2), 72–78. https://doi.org/10.21009/jpensil.v4i2.9876