Passenger Seat Design and Analysis for Railway Executive Transportation
DOI:
https://doi.org/10.21009/JKEM.10.2.1Keywords:
executive chairs, innovation, reclining, rotatedAbstract
The design of executive chairs for trains was carried out to improve safety, comfort and aesthetics of the train. Seat design innovation was made by prioritizing passenger comfort and paying attention to the S curve of the passenger's spine. This research carried out a redesign of the Indonesian railway executive chair with the added advantage of a chair that can be tilted up to 40° from the initial position of 10°. After the design concept is selected, a simulation will be done on three critical parts of the train seat including chair frame, footrest, and footrest frame. According to investigation, there are facilities tailored to user needs, starting from a folding table, middle arm rest, reclining seat 40°, rotate system 180°, and footrest. The mechanism used for reclining seats with the help of a gas spring to adjust the backrest and a rotate system mechanism with plate bearings. Thus, the seat can be adjusted to the direction of the train's advance. The final chair dimensions of 1101x´1091´x632 mm and material ASTM A36, polypropylene, rubber.
References
[1] S. Devi, A. Fatchiya, and D. Susanto, “Kapasitas kader dalam penyuluhan keluarga berencana di kota palembang, provinsi sumatera selatan,” J. Penyul., vol. 12, no. 2, pp. 144-156, 2016, doi: 10.25015/penyuluhan.v12i2.11223.
[2] A. P. Sari, G. Rahmadini, H. Carlina, M. I. Ramadan, and Z. E. Pradani, “Analisis masalah kependudukan di indonesia,” J. Econ. Educ., vol. 2, no. 1, pp. 29–37, 2023, doi: 10.22437/jeec.v2i1.23180.
[3] S. Sugianto and M. A. Kurniawan, “Tingkat ketertarikan masyarakat terhadap transportasi online, angkutan pribadi dan angkutan umum berdasarkan persepsi,” JTTL, vol. 1, no. 2, pp. 51–58, 2020, doi: 10.52920/jttl.v1i2.11.
[4] H. E. Arkaan, T. Yuniyanto, and D. A. Kurniawan, “Pembangunan transportasi kereta api dan pengaruhnya terhadap ekologi kota surakarta (1864-1942),” Candi, vol. 22, no. 1, pp. 95–111, 2022.
[5] K. Biomantara and H. Herdiansyah, “Peran kereta api indonesia (KAI) sebagai infrastruktur transportasi wilayah perkotaan,” Cakrawala, vol. 19, no. 1, pp. 1–8, 2019, doi: 10.31294/jc.v19i1.4356.
[6] R. Jazilah, R. D. Astuti, and B. Suhardi, “Analisis ergonomi kursi kereta api: a systematic literature review,” J. Rekayasa Sist. Ind., vol. 12, no. 1, pp. 95–104, 2023, doi: 10.26593/jrsi.v12i1.6536.95-104.
[7] C. Ningrum and H. Carles, “Analisis Pengujian lower guard frame berdasarkan pembebanan aktual dengan metode CAE finite elements analysis,” J. Mech., vol. 11, no. 2, pp. 48–53, 2020, doi: 10.23960/mech.v11i2.1422.
[8] B. Triyono, R. Putranto, D. E. Septiyani, D. Muliastri, and D. Setiawan, “Pembuatan konsep alat preparasi material cangkang kapsul lunak menggunakan metode pahl & beitz,” Permadi, vol. 6, no. 1, pp. 70–79, 2024, doi: 10.52005/permadi.v6i01.144.
[9] G. Pahl, W. Beitz, J. Feldhusen, and K. H. Grote, "Engineering design : a systematic approach. -3rd ed.," London: Springer London, 2006.
[10] A. W. C. Purnomo, O. A. Nugroho, and E. D. Septiawan, “Metode matrix morfology untuk perancangan bangun alat perakit knob switch assy electric park brake module,” Manutech J. Teknol. Manufaktur, vol. 15, no. 01, pp. 64–73, 2023, doi: 10.33504/manutech.v15i01.269.
[11] G. Prasetyo, FX. S. A. Riyanto, and Y. A. C. Kurnia “Analisa CAE kekuatan frame unik menahan unit powdering pada perancangan mesin ekstrusi pengolah plastik bio-organik berbahan dasar singkong dan gliserol,” IMDeC, vol. 3, pp. 1–5, 2021.
[12] R. I. Media, R. Adhiharto, Y. Y. Erlangga, and M. F. Friyadi, “Analisis parameter cetakan injeksi plastik menggunakan simulasi CAE untuk memprediksi kegagalan produk front cover MiFUS®,” J. Rekayasa Mesin, vol. 17, no. 2, pp. 241-248, 2022, doi: 10.32497/jrm.v17i2.3210.
[13] R. Muchammad, S. Jokosisworo, and A. W. B. Santosa “Pengaruh kuat arus dan jenis elektroda dengan kandungan nikel terhadap sifat mekanis baja kapal grade a pada pengelasan FCAW,” J. Tek. Perkapalan, vol. 12, no. 1, pp. 1–7, 2024.
[14] F. Restu, R. Hakim, and F. S. Anwar, “Analisa kekuatan material ASTM A36 pada konstruksi ragum terhadap variasi gaya cekam dengan menggunakan software solidworks 2013,” J. Integr., vol. 9, no. 2, pp. 113-118, 2017, doi: 10.30871/ji.v9i2.444.
[15] D. G. O. Sastrawan, E. Elisa, and K. R. Dantes, “Analisis dan optimalisasi aliran fluida pada prototype kendaraan ganesha surface water dengan menggunakan software solidworks,” J. Pendidik. Tek. Mesin Undiksha, vol. 9, no. 1, pp. 59–70, 2021, doi: 10.23887/jptm.v9i1.33122.
Downloads
Published
How to Cite
Issue
Section
License
Copyright (c) 2025 Jurnal Konversi Energi dan Manufaktur
This work is licensed under a Creative Commons Attribution 4.0 International License.
